Failure and Damage Cause Analysis of Stainless Steel Globe Valve

Analysis of failure and damage reasons of stainless steel globe valve: the rotation is on the same side as the thread, and the hexagonal and octagonal parts cannot be used to directly act on the housing with a wrench. The capacity and the size of the pipe end parts of the water separator should be controlled to avoid unqualified or excessive tolerance. Product configuration and tough construction are one type of pipeline damage.
The sundries in the pipeline increase the water resistance, and at the same time destroy the tightness of the valve and pipe fittings in the pipeline and inlet filter. Regulating valves and automatic valves, after the automatic exhaust and installation between the pressure reducing valve and the electric valve, also need to read the instructions carefully and carry out relevant debugging according to the requirements.
Excessive speed to the stainless steel globe valve produces a water hammer effect. Valves and pressure should be increased, several times may damage pipe fittings and valves, must pay attention to frequent fluctuations in pipeline pressure and temperature. Reducing the service life of valves and fittings should be avoided.